Unit has latch that pops open; ordrng 1 WP8531267 (Console) and 1 8193830 (Latch) and 1 WP8269209 (Switch)

Unit is a total no cool - extremely warm in both compartments - no frost pattern on either evaps. Unit was a no cool - changed compressor and cooled for a little bit and went back to not cooling. Unit has a leak - unable to determine original at this time without nitrogen. Both evap covers (styrofoam) do not have common indication of a leak at either evap. Unable to search for oil due to being an oil less system. Will need nitrogen to diagnose further. Requesting 2.5 hours on return.; saved tckt

Replaced defective CAM (splutch) and checkedran diagnostics and recalibrated control ; used 1 W10721967 (Cam) from stock

Upper rack hitting inner door and causing unit to not close properly. Door closes properly with upper rack out.; ordrng 1 W10727422 (Rack) and 1 W11259785 (Track) and 1 W11259786 (Track) and 2 WPW10546503 (Adjuster)s

Unit had a defrost issue causing no airflow in unit. Advised owner 24 hour manual defrost required prior to return trip.; ordrng 1 W11496881 (Control) and 1 WPW10383615 (Thermistor) and 1 WPW10316428 (Heater) and 1 W11501934 (Evap harness)