Maytag Washer Not Spinning? Here’s How to Fix It

Nothing is more annoying than a washer that won’t spin. All the effort put into sorting, washing, and drying the clothes can go to waste if the spinning cycle isn’t working correctly. Not only can this cause a lot of inconvenience and delay in getting your laundry done, but it also increases energy consumption as the clothes will not dry quickly enough, resulting in longer drying times.

If your Maytag washing machine isn’t spinning, don’t panic – there are a few things you can try to get it going again. We’ll walk you through troubleshooting steps for front-load and top-load machines. With a bit of elbow grease (and maybe a few spare parts), you should be able to get your washer up and running in no time. So let’s get started!

Check That the Cycle Is Correct

To ensure that your Maytag top load washer spins properly, check that you have selected the correct wash cycle and spin setting for your load. 

GENTLE, HANDWASH, or DELICATE settings use slower spin speeds for more fragile fabrics. Some models also allow you to adjust the spin speed from slow to rapid depending on the type of load. 

Before beginning a wash cycle, be sure you have chosen the right settings for the items in the washer.

Check the Power Supply

If your Maytag washer is not spinning, the first thing to do is check the power supply. This should be relatively easy and is a great place to start troubleshooting. However, keep in mind that minor issues with the power supply can lead to bigger problems for both front-load and top-load washing machines, so it’s important to pay close attention to this step.

Ensure the washer is fully plugged in and the outlet it’s connected to is working properly. Check the cord for signs of damage or fraying.

You should also check the fuse box in case the fuse to the washer has blown. If everything looks good, proceed to the next steps.

Check the Drum for Obstructions

To prevent your Maytag washer from not spinning clothes dry, ensure that you do not overload the machine and properly balance large or heavy items. Begin by checking the user manual to determine the washer’s capacity, and fill it 3/4 of the way full with each load. When using a top-load washer with an agitator, arrange large items evenly around it. If the load becomes unbalanced during the spin cycle, pause the cycle, reposition the items evenly, and then resume.

If your Maytag washer is still not spinning correctly, check for any clothing or other items that may be blocking the spin cycle. Both front-load and top-load washers can be affected by this issue. Inspect the drum of the washer and ensure no items are preventing it from spinning properly. 

The improper weight distribution of heavy items can also cause blockages that interfere with the spin cycle. If you find any potential obstructions, remove them and test the washer again.

With just a few quick steps, you may find that your previously stuck washer is now running smoothly. If not, continue reading for more troubleshooting tips.

The Filter May Need to Be Cleaned

All Maytag washing machines have a drain filter that filters the water flowing toward the drain. It catches lint, dirt, coins, and other items to prevent a clog in the drain. However, many people forget to clean the filter regularly, which can lead to clogging and prevent water from draining out of the washer. 

To fix this issue, carefully remove and clean the drain filter with water from the sink and pick out any built-up material. Place towels on the floor as needed in case of spills. To avoid this problem again in the future, set reminders for yourself to clean the drain filter at least once a month.

The Lid May Not Be Closing Properly

If your washing machine still doesn’t spin, it may be because the lid hasn’t been closed properly. This can happen if the lid is misaligned on a front load washer or the latch on top load machines isn’t engaged properly. 

Don’t worry – this issue is easily fixable! To do so, ensure all the locking tabs are placed correctly, then shut the lid firmly and try it again. With these few simple steps, you should have your machine spinning those clothes in no time!

If the machine still isn’t spinning, proceed to the next step.

The Drive Belt or Motor May Be Broken

If your Maytag washer is not spinning as it should, it could be a problem with the drive belt or motor. This will likely require an experienced repairer to look at it for front-load washing machines, so consider calling for help if this is your case. A professional maintenance specialist can ensure the job is done correctly and efficiently. 

As for top-load washing machines, this could require a new drive belt and some tinkering to get the job done. Regardless of which type of washing machine you own, troubleshooting an issue with its spinning system requires professional help from an expert.

It May Be a Damaged Control Panel or Timer Switch

If your Maytag washing machine still isn’t spinning after following all the troubleshooting tips above, you may have an issue with its control panel or timer switch. This is likely a more involved repair job and one best handled by a professional. 

It is important to remember that any repairs must be done safely, so enlisting the help of a qualified technician is the best way to ensure that your washer is repaired correctly and efficiently.

We hope these troubleshooting tips have helped get your Maytag washing machine up and running again. However, if you’ve tried all of these things and your machine still isn’t working, it’s time to call a professional for assistance.