Frigidaire makes a range of high-quality home appliances, such as washers, fridges, and dryers. Even though their products have great reputations, they can sometimes have problems that will need to be fixed.
This guide is for anyone who owns a Frigidaire washer that isn’t working. You’ll be able to go through all of the main reasons why it might not be working and apply our step-by-step instructions for how to fix it.
The following Frigidaire washer models are covered in this guide:
41739012890
41739022890
ATF6000ES0
ATF6000ES1
ATF6000FS0
ATF6000FS1
ATF6500GS0
ATFB6000ES0
ATFB6000ES1
ATFB6000FS0
BLTF6100FS1
F21C235CS0
F21C235CS1
F21C235CS2
F21C235CT0
FAFW3511KW0
FAFW3517KR0
LAFW3511KW0
LTF6000ES0
LTF6000ES1
LTF6000FS0
The best place to start if your Frigidaire washer won’t work is to check the user control and display board to see if it is functioning properly.
To determine whether the user control and display board is the reason your washer isn’t working:
Sometimes when a Frigidaire washer is not working, it can be as simple as a faulty power cord. It’s pretty rare, but it can happen, so check the power cord by:
If the cord is working ok, then check the incoming power. To test if the power outlet is working correctly:
Another component to check is the thermal fuse. The thermal fuse blows out when the washer overheats too much. When it does blow, then the washer will fail to start. You can check the thermal fuse by:
When the washer is operating, the door lock secures the door so that it cannot be opened. If the door lock doesn’t latch shut correctly, then the washer won’t be able to start. The door lock can fail due to both an electrical fault or a mechanical fault. You can check it by:
One of the least likely causes of your Frigidaire washer not working is a faulty timer. However, if you have checked out all of the other possible causes above, then it’s a good idea to check the timer.
Not all Frigidaire Washers.
You can do that by:
If all of the other issues above aren’t the source of the problem, then the final thing to do is to replace the main control board. The reason you do this as a last resort is that it is very rare for the main control board to fail. Once you have replaced the board, you can then check to see if it has solved the problem and your washer is now working.
It’s a frustrating experience—you go to start unloading your dishwasher, only to find it hasn’t…
Do you have a circuit breaker in your home that keeps tripping? If you’re constantly…
A burning smell in your microwave is a relatively common problem, but that doesn’t mean…
Is your Samsung freezer not freezing properly? Perhaps you’ve noticed your food is not as…
Whirlpool is known for its hard-wearing and reliable appliances, so when something goes wrong with…
If you want to ensure your refrigerator is running optimally and not wasting electricity, you…