Amana Washer Not Spinning: How To Fix It

If your Amana washer is not spinning, there’s no need to panic. With the right tools, knowledge, and time, you can get your washer spinning again in no time. You’ll start by troubleshooting common problems such as a broken belt or loose drain hose. You can also refer to the manufacturer’s instructions for additional help. With these tips and tricks you can get your washer spinning again quickly and easily.

Amana washers and common repairs 

Amana is a popular brand of washing machines that is widely used by households all over the world. However, despite its popularity, some users have reported issues with the machine not spinning properly. This can be a frustrating problem for anyone who relies on their washer to keep their clothes clean. 

A malfunctioning washing machine can lead to clothes not being cleaned properly, which can cause hygiene issues and even damage the fabric. A faulty machine can also lead to increased energy costs and water wastage. 

Therefore, it’s essential to address any issues with your Amana washer as soon as possible. In this blog, we will provide you with some tips on how to fix your Amana washer so that you can get back to doing your laundry with ease.

Common causes of washer not spinning

When your Amana washer is not spinning, there are a few common causes that you should investigate. One of the most common causes of a washer not spinning is a clogged drain. If the drain is clogged, the washer won’t be able to spin properly and may stop altogether. 

Another common cause of a washer not spinning is belt issues. If the belt is worn or broken, it won’t be able to turn the drum and the washer won’t spin. 

Finally, motor problems can also cause a washer not to spin. If the motor is damaged or not working properly, it won’t be able to turn the drum, which prevents it from spinning. 

If you suspect that any of these issues are causing your Amana washer not to spin, it’s important to take action right away. With a little troubleshooting and some basic repairs, you can get your washer back up and running in no time.

Step-by-step guide on how to repair your washer

1. Check the drain

The first thing to check is the drain. Make sure it’s not clogged or blocked, as this can prevent the washer from spinning properly.

To check the drain, start by unplugging your washer and pulling it away from the wall. Look for the drain hose, which is usually located at the back of the machine. Check for any kinks or blockages in the hose, and make sure it’s securely attached to both the washer and the drain.

Next, remove the drain hose from the wall and use a flashlight to inspect the drain itself. Look for any debris or obstructions that may be preventing water from flowing freely. If you see anything, use a wire hanger or plumbing snake to clear the drain.

Once you’ve checked and cleared the drain, reattach the hose and plug in your washer. Run a test cycle to see if the machine is now spinning properly. If not, you may need to call a professional for further assistance.

2. Replace the belt

Next, check the belt. If you’ve determined that the cause of your Amana washer not spinning is a worn-out or broken belt, it’s time to replace it. Here’s how you can do it yourself:

First, unplug the washer and turn off the water supply. Then, locate the belt at the bottom of the washer drum. Use a wrench to loosen the bolts on the motor and slide it away from the belt. 

Remove the old belt and install the new one, making sure it’s properly aligned with the pulleys. Tighten the bolts on the motor and test the washer to make sure it’s spinning properly. If the problem persists, you may need to call a professional for further assistance.

3. Replace the motor 

If neither of these above options fix the problem, it may be time to replace the motor. To replace the motor, you’ll need to disconnect the power supply and the hoses to the washing machine. After that, you can remove the old motor by unscrewing the bolts that hold it in place. 

Once you’ve removed the old motor, you can then install the new one. Ensure that you’re using the right motor for your machine and that it’s installed correctly. If you’re not confident in your skills, it’s best to hire a professional to help you. 

Tips for preventing future problems 

Prevention is always better than cure, and this holds true for your washing machine as well. To avoid future problems with your Amana washer not spinning, there are a few tips you can follow. 

First, make sure to clean your machine regularly, especially the lint filter and the drum. This will prevent any buildup of dirt and debris that can cause blockages and affect the performance of your machine. You should also avoid overloading your machine with too many clothes, as this can put a strain on the motor and cause it to malfunction. 

Always use the right amount of detergent and fabric softener as recommended by the manufacturer. Using too much can cause excess suds that can affect the machine’s performance. Finally, avoid washing items that are too heavy or bulky for your machine to handle. Following these simple tips will ensure that your Amana washer runs smoothly and lasts longer, saving you time and money in the long run.