Is your Whirlpool washer not spinning? Then this article is for you. When a washer stops spinning, it usually means that one or multiple components within your washer are defective and will need to be repaired or replaced.
To find the cause of the problem, simply check each of the components listed below, and hopefully you’ll be able to get your washer working again.
This guide covers all major Whirlpool washer models, including:
2LA5700XMW0
2LA5700XMW1
2LSR5233BN0
2LSR5233BQ1
2LSR5233BW0
2LSR5233BZ1
LSC8244EQ0
LSC8244EQ1
LSC8244EZ0
LSC8244EZ1
LSR6132EQ0
LSR6132EZ0
LSR7233EQ0
LSR7233EW0
LSR7233EZ0
LSR8233EQ0
LSR8233EZ0
LSR8244EQ0
LSR8244EQ1
LSR8244EZ0
LSR8244EZ1
The first component to check is the lid switch. The purpose of the lid switch is to turn your washer off when the lid is not closed correctly. If it turns your washer off when it shouldn’t, then the washer will stop spinning.
Here’s how to check the lid switch:
The second component in your Whirlpool washer to check is the drive belt. The drive belt helps your washer to rotate during a cycle, and when it becomes defective, your washer won’t be able to spin.
To check the drive belt:
The drive pulley works with the drive belt to make the washer spin around. If the drive pulley becomes worn out or defective, the washer won’t be able to spin correctly.
To check the drive pulley, you need to:
The next component to check is the motor coupling. The coupling connects the washer motor to the transmission. If your washer is overloaded, the coupling helps to protect the transmission and motor.
Here’s how to check the motor coupling:
The door latch is what ensures the door on your washer stays closed while it is running through a cycle. If you turn your washer on and the door is not shut properly, it will not start or may stop spinning if it becomes open during the cycle. Some washer models have mechanical door latches, while others have electronic ones (check your manual to find out which type your specific model has).
Here’s how to check the door latch:
The next component to check is the clutch. The clutch connects the transmission and the inner tub and helps the tub to get up to its correct spin speed. If it gets worn out, the washer might not be able to spin correctly.
To check the clutch, you need to:
The next component to check is the rotor. The purpose of the rotor is to work with the stator to help the tub rotate around. The rotor has multiple magnets on it that when damaged will stop the tub from working correctly.
Here’s how to check the rotor:
Another possible cause of your Whirlpool washer not spinning is a faulty stator assembly. The stator works with the rotor to help the tub rotate.
To check the stator assembly, you need to:
The next component to check is the drive motor. The drive motor helps the washer to spin. If it becomes defective, the washer won’t spin.
Here’s how to check the drive motor:
The motor control board provides power to the motor, and when it becomes defective, power is not supplied and your washer won’t spin.
Here’s how to check the motor control board:
The final component that could be causing your Whirlpool washer to not spin is the transmission. However, the transmission very rarely gets worn out and should only be replaced if you have checked every other component listed above first. If you do decide to replace the transmission, you will need to plug your washer back into the power source once the repair has been carried out and check if the problem has been solved.
A burning smell in your microwave is a relatively common problem, but that doesn’t mean…
Is your Samsung freezer not freezing properly? Perhaps you’ve noticed your food is not as…
Whirlpool is known for its hard-wearing and reliable appliances, so when something goes wrong with…
If you want to ensure your refrigerator is running optimally and not wasting electricity, you…
LG is known for making hard-wearing and reliable appliances, but even the most reliable dryer…
It’s always frustrating when an appliance isn’t working properly! If your dryer is not drying…